Our 310x310 build plate for 3D printers is made from Toray T300 carbon fiber and high temperature epoxy. This medium sized build plate is designed for the Creality CR-10 printer with durability in mind, and is chemical resistant while providing superior adhesion for most materials. The carbon fiber build plate is specifically engineered so that 3D print objects can be easily removed with a gentle flex. Available in either 1mm or 2mm thickness, these build plates are an upgrade to traditional aluminum and steel plates, and are a direct replacement for glass and polycarbonate plates. Each 3D printer build plate has a gloss surface on one side and a matte surface on the other, allowing for fine tuning the build adhesion for a given material. In addition, the 310mm by 310mm carbon fiber flexible build plate is created with aerospace-grade carbon fiber, the same material found in the world’s best airplanes, rockets, and vehicles, and will last through thousands of prints. With excellent thermal conductivity, our high-tech carbon fiber 3D printer build plates have a maximum recommended bed temperature of 130° C and a maximum nozzle temperature of 300° C. Carbon fiber build plates are not compatible with inductive sensors. For additional recommended use information, please visit our FAQ page.